How cool is it to have a glowing Apple logo like in MacBooks or your iPhone? Now, you can have that glowing Apple logo right in your handset.

Chinese manufacturer K.O. Gadget started selling mod kits that brings glowing Apple logo to your iPhone 4S and 4. Applying it to your device is very simple. First, you need to replace the back panel of your iPhone with the included rear panel with the transparent logo so that the light will be visible through it.

The logo will light up when:

  • The front screen turns on and it will stay on for 15 seconds after the front screen is turned off.
  • You are answering a call even if the front screen is turned off.
  • There is an incoming call and SMS received or the phone alarm is ringing.
  • The background applications are detected to be sending or receiving data during iPhone's standby mode.
  • The cellphone is charging.

K.O. gadget said that the mod does not have any impact on the battery life. Here are some of the things that you need to install the mod.

  • Phillips-head Screw Driver (included in the kit)
  • Pentalobe Screw Driver (included in the kit)
  • 3M sticker (included in the kit)
  • Forceps (included in the kit)
  • Scissors

and follow these instructions:

  • Remove the 2 screws flanking the iPhone's dock connector port
  • Slide open and remove the rear panel
  • Remove the 5 screws near the flash
  • Lift up the power connector of the screen
  • Position the light panel, then connect and mount it using the 3M sticker (details will be provided after purchase)
  • Replace the 5 screws near the flash
  • Slide on the included rear panel with the transparent logo (so that the light is visible through it)
  • Replace the 2 remaining screws flanking the dock connector port

The mod kit is available on K.O. Gadget's Web site for $42.90.